Showing 41–60 of 74 resultsSorted by latest
-
$19.99
“Let’s Go Brandon!” PMAG’s!
The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56×45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications.
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.
The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.
Made in the U.S.A.
-
Out of stock
$329.00
These are great takedown hard cases for your WWG Copilot. The interior is partitioned so you can take your gun down and drop it in with scope! It is compact, TSA approved and durable. If you are looking for a solid case for your WWG Copilot that will give you years of service this is it.
-
Out of stock
$139.99
WWG Trigger Happy Kit in Gold Titanium Nitride!
We are offering a limited supply of our World Famous Custom Wild West Guns Trigger Happy Kit in a Gold Titanium Nitride finish!
These give the same great performance as our standard Trigger Happy kits but add some “Bling” to that favorite rifle!
*Although our parts are considered to be drop-in, due to irregularities in Marlin’s manufacturing over past years some parts may require professional gunsmith fitting to function correctly.
-
$3,500.00 – $4,000.00
Now available!
Before we where known for building the toughest lever action rifles on Earth, the WWG Copilot rifle, Wild West Guns got it’s start in 1991 building custom competition pistols for Competitive shooting sports like USSL, USPSA, IDPA, and IPSC. We pride ourselves in building pistols that where meant to run Fast, Accurate and Powerful right from the start. The JWC (J.West Custom) 2011 pistol chambered in either 9mm or .40S&W is the official return to the custom competition market. The JWC is built all in house by our custom gunsmiths specifically for you the customer, making it a truly custom competition handgun!
Note: The JWC is through its final stages of performance testing and is currently available to the public! For more information or to place an order please email Jerimy@wildwestguns.com
-
$46.99
Wild West Guns has been leading innovation in modern lever-action rifles for years. In Alaska, where it gets very cold, gloves make it difficult to work the standard lever on your rifle. That’s how our Big Loop Lever was born, and why we later created this Hammer Head, an extension that provides a much greater purchase on the hammer for easy cocking of your rifle, even while wearing gloves.
The WWG Hammer Head is a great accessory for those with scoped rifles and is available in blue and stainless. It is self-tightening and can be tightened without tools in the field or on the workbench. The Hammer Head is CNC machined from the highest quality stainless or chrome-alloy steel and heat-treated to offer years of dependable service in the harshest of environments.
Please note that although the WWG Hammer Head is considered to be a drop-in part, due to irregularities in Marlin’s manufacturing over past years, some parts may require professional gunsmith fitting to function correctly.
Also, please be aware that these will not fit pre-safety Marlins.
-
Rated 4.00 out of 5
$35.00
WWG “QRS” (Quick Release Screw)
Looking for a quick way to release your Wild West Guns Big Loop lever from your Marlin Rifle? Look no further than the WWG Quick Release Screw!
The QRS allows easy removal of the lever for fast disassembly of your Marlin Lever action rifle for quick cleaning or maintenance in the field or at the workbench. Made to meet or exceed our high standards for quality, durability, and usability the Wild West Guns QRS (Quick Release Screw) will make you fall back in love with your lever-action rifle again!
The Wild Wes Guns QRS comes in Stainless Steel and Blued.
* Although our parts are considered to be drop-in, due to irregularities in Marlin’s manufacturing over past years some parts may require professional gunsmith fitting to function correctly.
-
-40%
$8.99 – $10.99
You can have all the “Hope and Change” you want but when it comes right down to it, things will only get done when you do them! When in doubt, ask yourself, “What Would Jim Do?” then get it done!
This super comfy Navy blue tee is in blazed with WWG’s very own Commander in Chief, Mr. Jim West himself! Show your WWG pride and let other know you make change and hope by doing what Jim would do!
-
Rated 5.00 out of 5
$170.99
Our Lever Happy Tune Kit includes:
– WWG Trigger Happy Kit: designed to provide a clean, crisp trigger pull to allow more accurate shooting. It eliminates trigger flop.
– WWG Bear Proof Ejector: machined from a single piece of spring steel, replacing the 2-piece factory ejector (which is prone to breakage and locking up your rifle).
– WWG Aluminum Magazine Follower: not affected by cleaning solvents, crumbling, splitting, or breaking like the factory plastic ones.
These are the same parts that go into all of our World-Famous Co-Pilot and Alaska Guide rifles. You can count on Wild West Guns to keep your rifle running when you need it the most.
*Our parts are considered drop-in. However, due to irregularities in Marlin’s manufacturing over past years, some parts may require professional gunsmith fitting to function correctly.
ALL KITS SHOULD FIT PRE-RUGER AND RUGER-MADE MARLINS.
Select options
This product has multiple variants. The options may be chosen on the product page
-
Out of stock
$42.99
.50 Alaskan never fired reloading brass from Starline brass!
Comes in 20 count package.
-
$55.99
Lee 45/70 Steel 3-Die Set. Includes Full-Length Sizing Die, Bullet Seating Die, Powder Through Expanding Die, Universal Shell Holder, Powder Dipper, and Instructions/Load Data. You can use these along with the Lee .457 Crimp Die sold separately to reload your .457 WWG brass.
Please note, the Powder Through Expanding Die will be stamped 45-70 or 40/45.
This die set is NOT compatible with 45/70 Hornady LEVERevolution cases.
You can find the .457 WWG reloading data here: .457 WWG Reloading data.
-
$56.00
Pack of 20 pieces of new brass designed for reloading .457WWG. These cartridges come clean and ready for use. You can find all the reloading data for .457WWG online at http://www.hodgdonreloading.com.
-
Out of stock
$3,995.00
With all of the versatility and reliability of the original 457WWG CoPilot comes the .44 Magnum WWG CoPilot. The smoothed and tuned action allows it to chamber almost every variety of .44 caliber ammunition (.44 Magnum, .44 Special and .44 Russian). Pair it with your favorite .44 Magnum revolver and you’re covered for all adventures!…
This item is subject to Federal Excise Tax (FET) that will be added upon completion prior to shipping. Please note: Some models may very slightly from the photos due to product supply and availability.
-
-30%
$12.99 – $22.99
Introducing the Wild West Guns “Custom” t-shirt! Our company has always been known for our exceptional custom firearms, and now we’ve designed a shirt that perfectly complements our style. This trendy school-friendly design can be worn anywhere without any reference to firearms. Get your hands on this stylish gear today!
-
$17.99
The WWG logo flex fit hat.
WWG Gear is Alaskan tough and looks great out on the range!
These logo hats are “School” friendly and can be worn anywhere!
Pick between the two sizes: Small/Medium or Large/Extra Large
-
$17.99
The full size WWG logo flex fit hat.
WWG Gear is Alaskan tough and looks great out on the range!
These hats are “School Friendly” and can be worn anywhere!
-
-13%
$39.99 Original price was: $39.99.$34.99Current price is: $34.99.
Get your hands on a new Wild West Guns Smokin’ Guns hoodie today! With our iconic image emblazoned on the back, you can show off your love for the Wild West in style. Don’t wait too long, these hoodies are going fast!
-
Out of stock
$3,000.00
When giant bears start thinking you’re their next meal and a revolver is all that stands between you surviving or becoming someone’s dinner power, and size count.
Developed out of necessity, the Wild West Guns Wolverine conversion creates a lot of power in a perfectly sized and easy to carry package.
The Wolverine fires the bone-crushing .454 Casull cartridge for maximum penetration and stopping power. We take it even further and add the Wild West Guns Moon-Clip conversion, which allows your Wolverine to fire a multitude of .45 caliber cartridges like the .45acp, .45 Win mag, .460 Rowland, etc. This makes the Wolverine one of the most versatile revolvers available today.
Wild West Guns customizes each one starting with the Ruger Super Redhawk. The barrel is cut and crowned to a specified length and the front sight relocated. Extra weight is machined off the frame and it is re-contoured. The Wolverine then receives a bead blast finish to help reduce glare and give it a true custom look.
The action is hand-tuned and polished and the trigger is worked over for a crisp and clean single and double-action pull.
Recoil control porting is added to help mitigate recoil and control muzzle rise allowing for quicker follow-up shots.
All Wolverine pistols are made to order and are not an in-stock item.
The Wild West Guns Wolverine Conversion is for when you need to make sure you stay on top of the food chain.
-
Our Alaskan Guide rifle (chambered in .457WWG)
This is not your granddad’s lever gun!
Please Note: We can not give a firm estimated delivery or completion date due to supply issues with parts and materials. We aim to have a turn-around time of approximately 9-12 months on CoPilots and custom builds; however, at this time we cannot guarantee that. We work hard to make sure our customers are happy/well taken care of. Please bear with us in these crazy times!
BASE PRICE ON THE ALASKAN GUIDE IS $3,500.00. AT THIS TIME YOU WILL BE CHARGE A NON-REFUNDABLE $500.00 DEPOSIT FOR YOUR ORDER! THE REMAINING BALANCE WILL BE DUE ON COMPLETION.
You will be contacted for payment once the rifle is finished. If the order is not paid in full within 30 days of the notification of completion, you will forfeit your deposit.
-
The World Famous CoPilot Take-Down rifle Chambered in .457WWG
This is not your granddad’s lever gun!
Please Note: We can not give a firm estimated delivery or completion date due to supply issues with parts and materials. We aim to have a turn-around time of approximately 9-12 months on Co-Pilots and custom builds; however, at this time we cannot guarantee that. We work hard to make sure our customers are happy and well taken care of. Please bear with us in these crazy times!
BASE PRICE ON THE CO-PILOT IS $3,995.00. AT THIS TIME YOU WILL ONLY BE CHARGED A NON-REFUNDABLE $500.00 DEPOSIT FOR YOUR ORDER! THE REMAINING BALANCE WILL BE DUE ON COMPLETION.
You will be contacted for payment once the rifle is finished. If the order is not paid in full within 30 days of the notification of completion, you will forfeit your deposit.
-
Out of stock
$110.00
WWG Full Length Rail Marlin 1895
Our Wild West Guns full-length rail for the Marlin 1895 is CNC Machined from Aircraft-grade Aluminum and anodized to military specifications making it lightweight but still Alaskan Tough!
Quickly add and remove your favorite optics on your Marlin 1895 with our 10-inch full-length rail that requires no drilling or tapping to work on your rifle.
* Although our parts are considered to be drop-in, due to irregularities in Marlin’s manufacturing over past years some parts may require professional gunsmith fitting to function correctly.
